Screen Fastening Clamps Securing Clip Fixture Tools

Read more less

RELIFE RL-056C Intelligent screen glue remover

Read more less

RL-056D Intelligent cutting and degumming machine

Read more less

REFOX RS52 Cell Phone Disassemble Screen Holder

Read more less

The REFOX FM40 Laminating Machine is a versatile desktop device that combines separation, lamination, and bubble removal functions. FM40 is typically used for phone/tablet screen separation, front glass lamination, OCA bonding, and bubble removal. It features automatic vacuuming without the need for an external air compressor or vacuum pump. This machine's heating platform is capable of separating flat screens up to 12.9 inches, including iPads and Android tablets. Meanwhile, the lamination and bubble removal chamber of the machine is particularly suitable for devices with flat or curved screens up to 7 inches. Bonding and bubble removal processes are completed in one step, resulting in high precision and efficiency.   Features | FM40 Desktop Laminating Machine Integrated Design: Combines separation, lamination, and bubble removal into one desktop device without the need for other external equipment, simplifying the screen repair process. Automatic Vacuuming: Features automatic vacuuming to ensure precise lamination between the LCD/OLED and front glass/touch digitizer/bezel during the repair process, eliminating air bubbles and improving repair quality. Wide Applicability: Suitable for various mobile phones, tablets, and even wearables, including the complete iPhone series, curved-screen phones (lamination & bubble removal only), tablets (separation only), and wearables (lamination & bubble removal only), it meets a wide range of devices' repair needs. Upgraded Efficiency: The device is easy to operate, applicable to separation for screens up to 12.9 inches and lamination with bubble removal for screens up to 7 inches. This enhances repair efficiency, reduces repair time, and helps repair professionals better serve customers. Enhanced Performance: The lamination and bubble removal capabilities have been enhanced, delivering a maximum 0.68 Mpa/98 Psi pressure due to building in a more powerful air compressor.   Applications for FM40 Lamination Machine 1. Broken Front Glass Replacement Support replacing broken front glass for phones/tablets/wearables, if the LCD/OLED/touch layer is intact.   2. Separation of Flat Screens (up to 12.9 inches) Support separating flat screens up to 12.9 inches, suitable for devices including phones, tablets, and watches.   3. Lamination and Bubble Removal of Flat & Curved Screens (up to 7 inches) Allow laminating without any air bubbles for both curved & flat screens up to 7 inches.

Read more less

Ma ant H4 Holder fixture

Read more less

Kaisi 303 mold for iphone 14 series

Read more less

Kaisi 303 mold for iphone 13/13 pro max/13 mini

Read more less

Kaisi 303 mold for iphone 12/12 pro max/12 mini

Read more less

Kaisi 303 mold for iphone 11 /11 pro/ 11 pro max

Read more less

Kaisi mold for X/XS/MAX mainboard repair

Read more less

Kaisi 1208 mold

Read more less

Kaisi intermediate tin planting platform / 18 in 1

Read more less

It  can  put  ipad  to  operate  laminating&  bubble  removing  in  16inch  supramaximal  working  area faster  cooling  speed  make  sure  effective  working  inside  machine  ，it  can  improve  work  effciency  to  avoid  problems  caused  by    overheating。   POWER:1000W VOLTAGE:110/220V 420X410X350MM

Read more less

The Kaisi 1905 2 in 1 LCD laminating machine is an innovative device designed for efficient screen repair and protection. Operating on a power supply of AC 220V at 50Hz with a robust power of 1000W, this machine ensures optimal performance for a range of tasks. It features an intelligent control system that simplifies the laminating process, allowing users to achieve professional results with ease. The working area measures 13.5 inches, accommodating flat surfaces and cylinders, making it compatible with various devices, including mobile phones and iPads up to 12 inches in size. This versatile laminating machine is perfect for both personal and professional use, providing a reliable solution for enhancing the durability of your screens.

Read more less

Kaisi 816 separator/ 7 inch KAISI K-816 CONSTANT TEMPERATURE HEATING PLATE WITH GLASSSEPARATING SILICONE PADExternal plate dimensions: 155x204x12Base dimensions: 160x210x35Working area dimensions: 130x180Temperatures settable via switch: 80°C - 120°C Operation Steps: Step 1: Put your LCD with the touch-screen on the metal plate, LCD side above. Step 2: Turn on the machine and wait for the metal plate to become 80-100 degrees. Step 3: Press the button and put the non-slip mat on the plate then put the LCD on it. Step 4: Start to separate the LCD off the glass with a core, then right and left movement with the core in between the LCD and the glass, please notice you must use gentle power and keep the core stay on the LCD surface so that it will avoid the touch-screen be damaged.

Read more less

Kaisi NT949 separator Temperature  control:  digital  high-efficiency  temperature  control,  rapid  temperature  rise. Separation:  Built-in  vacuum  pump  and  temperature  control  chip,  high-precision  separation  does  not  hurt  the  screen,  easy  to  split  screen. 110V/220V，50HZ，150W  

Read more less

A device intended for heating electronics, screens and other components. Makes it easier to remove glue, replace screens, and separate the glass from the display. The separator allows you to precisely set the temperature, which is crucial when working with electronics, and also has 3 channels that allow you to remember the temperature and recall it with one of three buttons. The device's display shows the temperature in real time, which increases work comfort and safety. The separator has two built-in vacuum pumps used to hold phones,opening the phone. The upper and lower ones are controlled separately. One of the biggest advantages of the device is quick heating to the set temperature. The 946S Max model is a reliable device for professionals that makes precise repairs of electronic devices much easier. Technical data: 2x Built-in vacuum pump Power supply: AC220C / AC110V Power: 400W Net weight: approximately 4kg Weight with packaging: 4.5kg The set includes: Kaisi 946 Max separator Power cord Silicone pad  Original packaging Additional information: Optimum operating temperature: 80°C - 100°C Operating environment: 20°C - 30°C Suitable for work with LCD and LED displays

Read more less

Kaisi K-946S separator Specification: Power: 350W Temperatre Range: 60-200℃ Panel thickness: 9mm Panel size: 160 * 80 * 9mm Equipment size: 220 * 160 * 80mm Applicable size range: mobile phones within 7 inches How to use: Just put an LCD on the heating panel, turn on the "Vacuum Pump" switch, then you can separate the glass. The LCD is firmly fixed on the panel while separating The LCD Screen Separator is used for separating glass lenses, touch screens, and LCD assembly for iPhone, Samsung, HUAWEI, XIAOMI, OPPO, and VIVO as well as other cell phones. (Support curved screen） Package includes: 1 x Touch Screen Separator 1 x Power Cable 1 x Silicone Pad

Read more less

Introduction REFOX RS50 is a mobile phone opener and clamp fixture that can efficiently remove and press mobile phone screens/back covers. Suitable for various mobile phone models, like iPhone, Samsung, Xiaomi, Vivo, OPPO, etc.   Application Phone front screens opening Android mobile's back covers separating Screen warping squashing Adhesive bonding, etc   Features | RS50 Mobile Phone Opener Screen removal and pressure-holding in one piece. The adjustable design adapts sundry phone sizes flexibly. Suction cup for efficient mobile front screen or back cover opening. The screws can be rotated in multi-direction smoothly, non-jamming. Protective bottom pad to prevent scratches from the phones. An insulated anti-skid foot pad is not easy to slide down. Made of high-hardness aluminum alloy, sturdy and durable.   Compatibility Support for Apple iPhone 6~13 Pro Max Support for Android Phones   Specifications Brand: REFOX Model: RS50 Name: Mobile Phone Opener & Clamp Fixture Color: Rose Gold Product Size: 28*10*12CM Package Size: 31*13*15CM Net Weight: 2.3KG Gross Weight: 2.5KG

Read more less

Supporto scheda madre RL-601S Mini

Read more less

Features: The screen separation of the heating-free mobile phone and the removal of the high-efficiency back cover glass are two in one The strong suction cup can be adjusted freely from front to back or left to right with a bracket. The force is uniform and the adsorption force is strong The screw tension design makes the suction cup pull up evenly without damaging the screen 360 º random rotation and fixation, simple, efficient, and convenient operation A cushion sponge pad, with high resilience and tensile resistance, is not easy to hurt the phone and has good cushioning performance Front and rear protective soft pads, removable keys, firmly clamped, not injuring the phone, applicable to most models on the market, and the width can be adjusted through the knob It is made of aluminum alloy and is resistant to compression and deformation The bottom anti-slip foot pad is designed to firmly fit the desktop and is not easy to slide

Read more less

Holding mold for iPhone 14pro max

Read more less